Programmable Temperature & Humidity Test Chamber / Constant
Temperature Humidity Chamber / Temp Humidity Chamber
Advantage of Temperature Humidity Test Chamber
●One machine, multiple functions
●Long time 85 °C / 85 % RH test
●Cold resistance test,
●Thermal cycle test,
●High and low temperature test,
●Storage condition,
●Calibration function.
● Wide temperature ranges and volume selection.
● Programmable touch screen controller.
Non-standard customized type Conventional narrow type Standard type
Standard
GB11158, GB10589-89, GB10592-89, GB/T10586-89, GB/T2423.1-2001,
GB/T2423.2-2001, GB/T2423.3-93, GB/T2423.4-93, GB/T2423.22-2001,
IEC60068-2-1.199, IEC60068-2-2.197, GJB150.3, GJB150.4, GJB150.9.
Technical Parameter
| Model | A | B | C | D | E | F |
Size of inner box
(W×H×D) | 40×50×40 cm | 50×60×50 cm | 40×75×60 cm | 60×85×80 cm | 100×100×80 cm | 100×100×100 cm |
Size of outer box
(W×H×D) | 92×138× 108cm | 102×146×116 cm | 102×162× 126cm | 113×172×148 cm | 150×186×139 cm | 158×188×168 cm |
| Volume of inner box | 80L | 150L | 225L | 408L | 800L | 1,000L |
| Control range of temperature and humidity | A:-20℃～150℃ B:-40℃-～150℃ C:-60℃～150℃ D:-70℃～150℃ RH20%～98% |
| Performance | Fluctuation of temperature and humidity | ±0.5℃；±2.5%RH |
| Deviation of temperature and humidity | ±0.5℃～±2℃；±3%RH(＜75%RH)；±5%RH(≥75%RH) |
| Accuracy of control analysis | ±0.3℃；±2.5%RH |
| Controller brand | Customized |
| Material | Interior | #SUS 304 Steel plate |
| Exterior | White&Blue |
| Thermal insulation material | High temperature and high density vinyl chloride for mate foam
insulation material |
| System wind path circulation | Centrifugal fan - wide band forced air circulation
(upper in, lower out) |
| Refrigerating method | Single stage mechanical compression refrigeration |
| Refrigerating machine | Fully enclosed piston type compressor From TAIKANG French |
| Refrigerant | R4O4A/Dupont environmental refrigerant(R23+R4O4) |
| Condensation method | Air or water cooled |
| Heater | Nickel-chromium electric heating wire heater |
| Humidifier | Semi-enclosed steam humidification |
| Water supply method | Fully automatic circulating water supply (manual Watering) |
| Standard equipment | View window (double-layer hollow tempered glass)×1, 50mm test hole
position and left×1, PL box light×1, partition×2, dry and wet ball
gauze×1 fuse×3 rubber soft plug ×1, power cord×1 |
| Safety device | No fuse switch, (compressor overload, refrigerant high and low
pressure, ultra-humidity and over-temperature) protection switch,
fuse fault warning system |
| Power | 1φ, 220V AC±10% 50Hz 3φ, 380V AC±10% 50Hz |
Pictures
About US
1)Customer inquiry process:
Discussing testing requirements and technic details, suggested
suitable products to customer to confirm. Then quote most suitable
price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized
requirements. Offer reference photoes to show the proucts
appearance. Then, confirm the final solution and confirm final
price with customer.
3)Order process:
We offer below business term:
| Accepted Delivery Terms: | FOB, CFR, CIF, EXW, DDP |
| Accepted Payment Currency: | USD, EUR, HKD, CNY |
| Accepted Payment Type: | T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow |
| Nearest Port: | Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired |
4)Production and delivery process:
We will produce the machines according to confirmed PO
requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again
with the machine. Then do own factory calibration or third party
calibration(as customer requirements). Check and test all the
details and then arrange packing.
Deliver the products in confirmed shipping time and inform
customer.
